FILTER

To complement your Starter Kit, we recommend the “Spa Fill Pre-Filter”
Pre-Filter solves water problems before they get into your spa.

The Pre-Filter enhances the performance of or other
hot tub maintenance products.

The Pre-Filter will clean up to 40,000 gallons of water. The Pre-Filter will last the average spa owner for over 10 years

The Pre-Filter will solve most initial spa water problems caused by:

Heavy Metals (Including copper) Organic Contaminants High Calcium / Hard Water Sediment and Chlorine

 

Other Suggested Uses:

• Gardens: Removes chlorine and other harmful contaminants that can harm vegetables and flowers. Click here to view video on use in gardens.
• Ponds: Perfect for starting Koi ponds and water fountains out with the best water possible
• Fish Tanks: Instantly removes contaminants that can harm fish and water plants
• Car Washing: Help reduce scale build-up
  Click here to view video on outdoor use.

•  
  For instructions on how to use the Pre-Filter please refer to the Quick Start Guide.

Save money, time and hassle with pre-conditioned water. Reduces or eliminates damaging contaminants BEFORE they get into your hot tub.

SPA WATER SO SAFE YOU CAN DRINK IT!

Pre-Filter Specification Sheet
When tested against the U.S. National Sanitation Foundations' (NSF) Standard No. 53 “Drinking Water Treatment Units – Health Effects” the Pre-Filter water treatment unit met all requirements of the standard.

Unit size/weight:
2 ½” X 10” with FPT inlet/outlet; weight: 1 ¼ lbs

Filter Media Test:
Input turbidity: 12 TU
Effluent turbidity: Initial: 0.8 TU
Effluent turbidity: 50%: 0.9 TU

Unit test:
Model: Pre-Filter
Capacity: Up to 40,000 Gallons (depending on source water quality)
Flow Rate: 2 GPM
Temp range: 35F-100F
Working pressure range: 20-100 psi

The Pre-Filter is a combination of granular activated carbon (GAC) and a reduction/oxidation media.The combined media reduces or eliminates these contaminants:

Heavy metals: Mercury Lead Iron Copper Cadmium Barium Chromium VI Chromium III Salenium

Other Contaminants: Volatile Organic Contaminates (VOC’s) Hydrogen sulfides Chlorine and its byproducts (THM’s) Fluoride Nitrate Arsenic Chlorine Endrin Lindane Methoxychlor Toxaphene Silvex

The Pre-Filter has been tested to applicable the U.S. NSF's 42 & 53 Standards by an independent lab to reduce and/or eliminate all contaminants listed. There are hundreds of other contaminants the filter reduces and/or eliminates.

Calcites and Lime/Scale:
The Pre-Filter alters the molecular structure of calcite which inhibits its clinging capability. Calcium ions are removed from the water which changes calcite lime/scale deposits into aragonite. This alteration causes the lime/scale to remain suspended in the water where it cannot cling to equipment.

Materials:
All materials used in the Pre-Filter are approved by the U.S. FDA for contact with foodstuffs including potable water. All thermoplastic/thermoset plastics used comply with the U.S. NSF's Standard 14.

Back to Top of Page.